Positioning Set-Top Systems; Positioning Component Systems - Polycom VSX Series Administrator's Manual

Administrator's Guide for the VSX Series

Positioning Set-top Systems

Positioning Component Systems

1 - 4
The VSX 5000, VSX 6000A, and VSX 7000s systems are designed to be placed
on top of a monitor. You can order a shelf that can be mounted on a wall or
placed on top of a flat-panel monitor.
To position the system:
1. The hardware kit you received with the system includes a pair of
self-adhesive feet. If the monitor's chassis slopes back sharply, install the
feet on the bottom of the system to stabilize it.
2. Place the system in the desired location, with the rounded front portion
hanging over the front of the monitor or shelf. Leave enough space to
work, so that you can connect the cables easily.
3. Remove the packaging collar from around the VSX system camera.
The VSX 7000e and VSX 8000 systems are designed to be placed on a tabletop
or in an equipment rack.
If you received a network interface module with your system, you may find it
convenient to install it before positioning the system. Refer to the installation
sheet that you received with the network interface module.
Feet