Table of Contents
Advertisement
7700 MultiFrame Manual
7710UC-KF HD Key/Fill Up Converter
2.
INSTALLATION
The 7710UC-KF comes with a companion rear plate that occupies two slots in the frame. For information
on mounting the rear plate and inserting the module into the frame see the 7700FR chapter section 3.
2.1.
VIDEO CONNECTIONS
FILL
Input BNC connector for 10-bit serial digital fill signals compatible with the SMPTE 259M
standard. The module needs to be set to a specific video input standard using the on screen
menu at this current time. See Table 5 for a list of the video standards supported.
KEY
Input BNC connector for 10-bit serial digital key signals compatible with the SMPTE 259M
standard. The module needs to be set to a specific video input standard using the on screen
menu at this current time. See Table 5 for a list of the video standards supported.
FILL OUTPUT This BNC connector is used to output the converted input fill signal as serial component
video, compatible with the SMPTE 292M standard and has on screen display menus (OSD)
superimposed over the video The module needs to be set to a specific video output standard
using the on screen menu at this time.
7710UC-KF-2
Figure 2: Rear Panel
Revision 0.2
Advertisement
Table of Contents
