Table of Contents
Advertisement
2.
INSTALLATION
The 7712HDC-S comes with a companion rear plate that occupies two slots in the frame and has 7 BNC
connectors, and one female DB9 connector. The 7712HDC-SN-EAES4 comes with a companion rear
plate that occupies two slots in the frame and has 9 BNC connectors, and one female DB9 connector. For
information on mounting the rear plate and inserting the module into the frame see the 7700FR chapter
section 3.
2.1.
VIDEO CONNECTIONS
HD INPUT Input BNC connector for 10-bit serial digital video signals compatible with the SMPTE 292M
standard. The 7712HDC can be set to automatically detect the standard or set to a specific
video standard using the on screen menu. See Table 2 for a list of the video standards
supported.
SDI OUTPUT These two BNC connectors are used to output the downconverted input video as serial
component video, compatible with the SMPTE 259M standard.
7712HDC HD Broadcast Quality Down Converter
Figure 2: 7712HDC Rear Panels
Revision 1.2
7700 MultiFrame Manual
7712HDC-3
Advertisement
Table of Contents
