Kemper KHS Mini System Control Installation And Operating Instructions Manual page 78

Journal/Flushing log
Ill. 8.58 Opening the CSV log file dialogue
Datalogging
The KHS Mini System Controls have a facility to be used as measuring instruments. To do that, the
system controls that are connected to a sensor are configured as described in Chapter 8.2.4. Use the
"Datalogging" function to generate, delete and save the recorded measurement data records in the
form of a CSV file on the PC. Up to 12 million lines can be backed up. Click on the
FILE to generate the current CSV file, which is not completely full yet. Click on the CSV file to open a
dialogue as shown in Illustration 8.59. Here you can select if the flush log should be saved or
immediately opened. Use the button
delete the selected file.
Manual KHS Mini System Control
You can use the "Journal" function to
open and save the event log as a CSV
file. The event log documents the water
exchange procedures, error messages
and parameter changes performed by the
KHS
documentation
duration of the water exchange and the
temperatures, recordings can be made
across a defined time period and verify
the hygienic state of the drinking water
system. To open the CSV file, click
OPEN JOURNAL AS
window then opens where you can select
whether the flushing log should be saved
or if it should be immediately opened
(see Illustration 8.58). You can use the
"Flushing log" function to open and save
the flushing log as a CSV file. The
procedure is the same as for the
"Journal" function.
to open a query as shown in Illustration 8.60. Click
75
Mini System. Based
about the
CSV. A dialogue
GENERATE LOG
on the
locality,
OK to