Kemper KHS Mini System Control Installation And Operating Instructions Manual page 77

Configuration
Ill. 8.57 Selection dialogue "Upload configuration file"
Ill. 8.58 Selection dialogue "Backup configuration file"
Note:
After successfully configuring your system controls, it is recommended to save the
configuration as a backup file. If the KHS Mini System Control -MASTER 2.0- is
defective it can be quickly replaced and the configuration can be read in. That
saves having to configure everything again.
Manual KHS Mini System Control
Uploading a configuration from a file
The "Software update" function can be
used to install an existing configuration
from the connected KHS Mini System
Control. To do that, click the search
button. The CFG files open in the
window, see Illustration
pressing the LOAD
FROM FILE
configuration is loaded into the system
control.
Configuration
You can use the "Configuration" function
to backup configured configurations of
the connected KHS Mini System Control
to your PC. To do that, click the
CONFIGURATION IN FILE
window, see Illustration 8.58, backs up
the CFG file to the desired folder on your
PC.
74
8.57. After
CONFIGURATION
button, the selected
WRITE
button. The