Kemper KHS Mini System Control Installation And Operating Instructions Manual page 59

Configuration of SLAVE 1.4 (measurement)
Manual KHS Mini System Control
Select control type
Choose the available control types
that can be applied to the selected
KHS Mini System Control from a
dropdown list. The KHS Mini System
Control -SLAVE- 1.4 in this sample
project should act as a measure-
ment SLAVE.
Select sensor
The possible sensors are selected
from a dropdown list. In the sample
project being used, the KHS Mini
System Control -SLAVE 1.4- should
trigger a KHS Pt 1000 temperature
sensor.
Save settings
To effect the new parameters of the
input box, click the
CONTROL
settings.
56
WRITE IN
button to save the