Kemper KHS Mini System Control Installation And Operating Instructions Manual page 58

Configuration of SLAVE 1.3 (measurement)
Manual KHS Mini System Control
Select control type
Choose the available control types that
can be applied to the selected KHS Mini
System Control from a dropdown list. The
KHS Mini System Control -SLAVE- 1.3 in
this sample project should act as a
measurement SLAVE.
Select sensor
The possible sensors are selected with a
dropdown list. In the sample project
being used, the KHS Mini System Control
-SLAVE 1.3- should trigger a KHS-
CONTROL-PLUS.
Save settings
To effect the new parameters of the input
box, click the
button to save the settings.
55
WRITE IN CONTROL