Kemper KHS Mini System Control Installation And Operating Instructions Manual page 27

Password
To protect the controller from interference, a password can be configured. If a password has been
stored, the password will be queried before every setting (see Ill. 8.18). To do that, select the
"Password" menu item in the system control submenu with "OK". Use the "↑" and "↓" buttons to select
the digit. Press the "OK" button to confirm and to select the next digit. Pressing "OK" again stores the
set password and the system control submenu opens again.
Ill. 8.17 Setting the password
Ill. 8.18 Password query
Default settings
To reset the control to the default settings, select the menu item "Default setting" in the system control
submenu with "OK". A query then opens. If it is acknowledged with "OK", the system is reinstalled.
Ill. 8.19 Restore the default settings
Restart the MASTER
To restart the controller, select the menu item "Default setting" in the system control submenu with
"OK". A query then opens. If it is acknowledged with "OK", the system is restarted.
Ill. 8.20 Restart -MASTER 2.0-
Manual KHS Mini System Control
Note:
The password "0000" is
the
setting.
Note:
All
configurations will be
lost!
24
factory default
previous