324 Port InfiniBand FDR Switch Platform Hardware Installation Guide
Container screws
Step 3.
Step 4.
Step 5.
Step 6.
Step 7.
Step 8.
1.6.3.5
Installing the Shelf
Step 1.
Mellanox Technologies
Figure 4: Container Screws
Remove the four sides of the container by unscrewing the phillips head screws
holding the sides on.
Remove and put aside the box containing the cables.
Remove and put aside the box containing the cable management kit.
Remove and put aside the box containing the Installation kit.
Visually inspect the chassis, make sure that:
there is no visible damage
6 PSUs are installed
all 4 fans are installed
Remove all protective plastic film from all sides and top of the chassis.
The leafs, spines, and management modules are shipped separately.
Do not remove any of the blocks or either of the lock-down bars at this time.
Select the location in the rack. Try to keep the chassis as low as possible to
keep the center of gravity low.
Rev 1.0
17