Table of Contents
Advertisement
324 Port InfiniBand FDR Switch Platform Hardware Installation Guide
Step 3.
Step 4.
Mellanox Technologies
Measure the distance between the vertical supports and adjust the shelf brack-
ets according to this distance. This chassis can be installed in a rack with a
distance between the vertical supports of from 65cm (25.6in.) to 80cm
(31.5in.).
The shelf comes with the four brackets pre-installed. Two of the brackets
should be loose. They may need to be removed and repositioned to meet the
distance between the vertical supports of the rack.
Figure 6: Adjustable Shelf Brackets
Figure 7: Top of Shelf Bracket
Top of shelf
Bottom of shelf is even with this side of the
bracket, the greater distance between the holes
and the edge of the bracket show that this is the
bottom side.
These two brackets will
need to be adjusted. They
may even need to be
removed and repositioned.
The holes in the bracket are
offset to one side.
The holes must be closer to
the top of the shelf.
The holes in the bracket are
offset to one side.
The holes must be closer to
the top of the shelf.
Rev 1.0
19
Advertisement
Table of Contents
