648 Port InfiniBand FDR Switch Platform Hardware Installation Guide
Container screws
Step 1.
Remove the four sides of the container by unscrewing the phillips head screws
holding the sides on.
Step 2.
Remove and put aside the box.
Step 3.
Visually inspect the chassis, make sure that:
•
•
•
Step 4.
Remove all protective plastic film from all sides and top of the chassis.
Mellanox Technologies
Figure 4: Container Screws
It is highly recommended to have a screw gun or electric screwdriver for this step.
there is no visible damage
10 PSUs are installed for the chassis
all 8 fans are installed
The leafs, spines, and management modules are shipped separately.
Rev 1.4
15