Table of Contents
Advertisement
Rev 1.0
1
Chassis Installation
This chassis can be installed in standard 19" racks that have depths between 65cm
(25.6in.) and 80cm (31.5in.) between the vertical supports of the rack.
Installation and initialization of the chassis is a simple process requiring attention to the normal
mechanical, power, and thermal precautions for rack-mounted equipment. Your chassis comes
only with the power supplies and fans pre-installed. The rest of the openings are populated with
blanks. All of the leafs, spines, and management modules come shipped in separate packages.
The chassis requires initial configuration to get the chassis and Fabric management up and running
through remote management. see "Configuring the Switch Management Modules for the First
Time" on page 41.
This unit is intended for installation in a Restricted Access Location. A restricted
access area can be accessed only through the use of a special tool, lock and key, or
other means of security.
1.1
Environmental and Safety Recommendations
The following are Mellanox recommendations.
Recommended ambient temperature in the System room is 20
Recommended humidity ranges is 40% ± 15% without condensing.
It is highly recommended that the installation sites be as isolated as possible from all
sources of radio transmissions and electrical interference.
It is highly recommended that the installation site building be equipped with a light-
ning rod.
It is highly recommended that the installation site be equipped with smoke detectors
and a fire alarm warning system.
10
Chassis Installation
o
o
± 5
C.
Mellanox Technologies
Advertisement
Table of Contents
