Figure 4: Opening The Container - Mellanox Technologies MSX6512-4R. Hardware Installation Manual

InfiniBand FDR Switch Platform Hardware User Manual
3. Unscrew the sides of the crate.
4. Remove and put aside the box.
5. Visually inspect the chassis, make sure that:
• there is no visible damage
• 4 PSUs are installed for the chassis
• all 4 fans are installed
6. Remove all protective plastic film from all sides and top of the chassis.
7. If you are not using a mechanical lift to install the chassis, reduce the weight of the
chassis by removing all of the power supply units, and fan units, and put aside for
reinstallation after the chassis is installed in the rack.
1.7.1.5 Installing the Shelf
1. Place the ESD mat on the floor where you will be working and put on the ESD strap.
Make sure the ESD strap is touching your skin and that the other end is connected to
a verified ground.
2. Make sure you have the spine side close to the doors to ensure maximum cable bend-
ing room
Mellanox Technologies

Figure 4: Opening the Container

Container screws
It is highly recommended to have a screw gun or electric screwdriver for this step.
The leafs, spines, and management modules are shipped separately.
22