Rev 1.0
Step 15.
Screw the upper brackets onto the vertical supports and tighten in place. You will need
the socket wrench with both extensions to tighten these bolts.
Step 16.
Slide the chassis onto the shelf until the face plate of the chassis touches the vertical
rack support.
Step 17.
Make sure the upper brackets are installed in their correct location.
Step 18.
Screw the 8 bolts through the faceplate into the caged nuts, DO NOT TIGHTEN.
Step 19.
Now you can remove the fork lift and pallet.
28
Figure 20: Upper Brackets and Offset Location
Figure 21: Offset to Upper bracket Bolts
Chassis Installation
Mellanox Technologies