Figure 24: Adjusting The Short Bracket; Figure 25: Securing Screws And Brackets; Figure 26: Switch Mounted In A Rack - Rack Rear View - Mellanox Technologies Grid Director 4036 Installation Manual

14. Adjust the short brackets snuggly onto the rack's vertical rail using the adjusting holes
(make sure that the rail is perfectly aligned by using the same U as used in the front of the
rack).

Figure 24: Adjusting the short bracket

15. Tighten the rack screws. (Rack screws are not supplied)
16. Tighten the short brackets to the mounting bars.

Figure 25: Securing Screws and Brackets

Result – Rack rear view
Figure 26: Switch mounted in a rack – Rack rear view
40
Hardware Installation