Rev 1.0
Step 5.
Insert three caged nuts into the rack for each of the four shelf brackets (the 2 brackets
that are adjustable and the 2 that are fixed). Make sure that the caged nuts are all at the
same height on the vertical supports.
Step 6.
Put the Shelf into the rack and twist the shelf into place. Make sure the spine side of
the shelf is closest to the rack doors. See Figure 10 to identify the spine side of the
shelf.
Step 7.
Install and tighten the 12 M6 bolts into the caged nuts.
20
Figure 8: Placing the Shelf Bracket
Figure 9: Caged Nut Locations for the Shelf Brackets
Chassis Installation
Adjusting slots
Mellanox Technologies