Table of Contents
Advertisement
Figure 105. PCI riser-card bracket removal
If you are instructed to return the PCI bracket, follow all packaging instructions, and use any packaging
materials for shipping that are supplied to you.
Installing the PCI riser-card bracket to the riser card
Use this information to install the PCI riser-card bracket from the riser card.
To install the PCI riser-card bracket to the riser card, complete the following steps:
Step 1.
Read the safety information that begins on
417.
Step 2.
Turn off the server and peripheral devices and disconnect the power cords and all external cables.
Step 3.
Remove the cover (see
Step 4.
Align the holes on the PCI riser card and the PCI bracket and install the screw that attaches the PCI
riser card to the PCI bracket.
Figure 106. PCI riser-card bracket installation
Step 5.
If you need to install an adapter (see
Step 6.
Install the PCI riser card assembly (see
Step 7.
Reconnect the cables for the adapter.
Step 8.
Install the cover (see
"Safety" on page v
"Removing the cover" on page
"Replacing an adapter" on page
"Installing a PCI riser-card assembly" on page
"Installing the cover" on page
and
"Installation guidelines" on page
424).
448).
425).
.
Chapter 5
Removing and replacing components
487).
489
Advertisement
Table of Contents
