Table of Contents
Advertisement
Attention: Neither tilt nor push the battery by using excessive force.
Figure 92. Battery removal
c.
Use your thumb and index finger to lift the battery from the socket.
Attention: Do not lift the battery by using excessive force. Failing to remove the battery
properly may damage the socket on the system board. Any damage to the socket may require
replacing the system board.
Step 6.
Dispose of the battery as required by local ordinances or regulations. See the IBM Environmental
Notices and User's Guide on the IBM System x Documentation CD for more information.
Installing the system battery
Use this information to install the system battery.
The following notes describe information that you must consider when replacing the system-board battery in
the server.
• When replacing the system-board battery, you must replace it with a lithium battery of the same type from
the same manufacturer.
• To order replacement batteries, call 1-800-426-7378 within the United States, and 1-800-465-7999 or 1-
800-465-6666 within Canada. Outside the U.S. and Canada, call your IBM marketing representative or
authorized reseller.
• After you replace the system-board battery, you must reconfigure the server and reset the system date
and time.
• To avoid possible danger, read and follow the following safety statement.
Statement 2
CAUTION:
When replacing the lithium battery, use only IBM Part Number 33F8354 or an equivalent type battery
recommended by the manufacturer. If your system has a module containing a lithium battery, replace
it only with the same module type made by the same manufacturer. The battery contains lithium and
can explode if not properly used, handled, or disposed of. Do not:
• Throw or immerse into water
• Heat to more than 100°C (212°F)
• Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
.
Chapter 5
Removing and replacing components
479
Advertisement
Table of Contents
