1
PCI riser-card assembly 2
2
PCI riser-card assembly 1
To remove the riser-card assembly, complete the following steps:
Step 1.
Read the safety information that begins on page Safety information.
Step 2.
Turn off the server and peripheral devices, and disconnect the power cord and all external cables.
Step 3.
Slide the server out of the rack.
Step 4.
Remove the cover (see Removing the cover).
Step 5.
Grasp the assembly at the front tab and rear edge and lift it to remove it from the server. Place the
riser-card assembly on a flat, static-protective surface.
Installing a PCI riser-card assembly
To install a PCI riser-card assembly, complete the following steps.
Note: The illustrations in this document might differ slightly from your hardware.
146
ThinkServer RD220 Hardware Maintenance Manual