Table of Contents
Advertisement
c.
Corner of the RAID flash power module holder (as shown in the top callout in the above
illustration)
d.
Under the M.2 air baffle (as shown in the right callout in the above illustration)
Step 3.
Route M.2 signal cable through cable clip
Step 4.
Proceed to connect M.2 signal cable to the RAID adapter on PCIe riser assembly, and install the
assembly. See
•
RAID adapter on PCIe riser 1
2a
•
RAID adapter on PCIe riser 2
2b
Step 5.
Proceed to connect the cables to the M.2 backplane assembly and install the assembly. See
"Install the M.2 backplane assembly" on page
PCIe riser card cable routing
Follow the instructions in this section to learn how to do cable routing for the PCIe riser cards.
See the corresponding section to complete the PCIe riser card cable routing:
•
"PCIe riser 1 riser card cable routing" on page 237
•
"PCIe riser 2 riser card cable routing" on page 238
PCIe riser 1 riser card cable routing
This section provides cable routing instructions for the following cables:
Cable
Riser 1 signal cable, 280mm/320mm
Riser 1 signal cable, 375mm/360mm
Complete the following procedure to route the cables properly.
Procedure
Step 1.
Make sure the riser card is installed on the riser cage, and the required cables are connected to the
riser card properly. See
Step 2.
Connect the signal cables to the system board and route the cables.
a.
Connect the blue signal cable to PCIe 8 and PCIe 9 connectors on the system board.
b.
Connect the silver signal cable to PCIe 6 and PCIe 7 connectors on the system board.
c.
Route the blue signal cable along the intrusion switch as shown.
d.
Route the silver signal cable through the cable wall. Press the cable down toward the system
board to avoid interfering the retaining clips of memory module slots.
"Install the PCIe riser assembly" on page
"Install the PCIe riser card" on page
.
C
155.
131.
Color
From: PCIe riser 1
Blue
MCIO3, MCIO4
Silver
MCIO1, MCIO2
165.
To: system board
PCIe 8, PCIe 9
PCIe 6, PCIe 7
.
Chapter 6
Internal cable routing
237
Advertisement
Table of Contents
Troubleshooting
