Installing An Optional Pci-X Riser-Card Assembly - Lenovo RS110 - ThinkServer - 6438 User Manual

4. Remove the retention clip 1 from the drive and save it for future use.
To install a CD or DVD drive, complete the following steps:
1. Read the safety information that begins on page v and "Installation guidelines"
2. Make sure that the server and peripheral devices are turned off and that the
3. Follow the instructions that come with the drive to set any jumpers or switches.
4. Attach the drive retention clip 1 to the side of the drive.
5. Slide the drive into the CD/DVD drive bay until the drive clicks into place.
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 35.

Installing an optional PCI-X riser-card assembly

The server comes with a PCI Express riser-card assembly installed. You can
remove the assembly and install an optional PCI-X assembly. See
http://www.lenovo.com/thinkserver for a list of riser-card assemblies you can install
in the server.
The PCI-X riser-card assembly provides one PCI-X expansion slot on the riser card.
Install only a PCI-X or PCI adapter in the expansion slot.
To install a PCI-X riser-card assembly, complete the following steps.
1. Read the safety information that begins on page v and "Installation guidelines"
2. Turn off the server and peripheral devices, and disconnect the power cord and
3. Remove the cover (see "Removing the cover" on page 21).
4. Install the PCI-X riser-card power cable.
30
ThinkServer RS110 Types 6435, 6436, 6437 and 6438: User Guide
on page 19.
power cords and all external cables are disconnected. Remove the cover (see
"Removing the cover" on page 21).
on page 19.
all external cables.