To remove the riser-card assembly, complete the following steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and peripheral devices, and disconnect the power cord and
3. Slide the server out of the rack.
4. Remove the cover (see "Removing the cover" on page 37).
5. Grasp the assembly at the front tab and rear edge and lift it to remove it from
Installing a PCI riser-card assembly
To install a PCI riser-card assembly, complete the following steps.
1
PCI riser-card assembly 2
2
PCI riser-card assembly 1
on page 33.
all external cables.
the server. Place the riser-card assembly on a flat, static-protective surface.
Chapter 5. Installing optional devices and replacing customer replaceable units
43