Hole for baffle tab
Figure 30. Microprocessor 2 air baffle removal
Installing the microprocessor 2 air baffle
Use this information to install the microprocessor 2 air baffle.
To install the air baffle, complete the following steps:
Step 1.
Read the safety information that begins on
417.
Step 2.
Align the microprocessor 2 air baffle tab with the hole on the side of the power-supply cage; then
insert the tab into the hole on the cage (make sure that the front end of the air baffle is lined up with
the blue touch point tab on the left side of fan 6). Press the air baffle down until it is securely seated.
Hole for baffle tab
Figure 31. Microprocessor 2 air baffle installation
Step 3.
Install the cover (see
Baffle tab
"Safety" on page v
Baffle tab
"Installing the cover" on page
Microprocessor 2
air baffle
and
"Installation guidelines" on page
Microprocessor 2
air baffle
425).
.
Chapter 5
Removing and replacing components
427