record loss. Once the main device becomes properly, the sub can still work until you use the web to
fix manually.
During the whole process (the main device is working properly > main device is in malfunction >
main device becomes working properly again), you can use this virtual IP to access the device all the
time.
Procedure
Step 1
Log in to the web as the admin user.
Select SETTING > Cluster Service > CLUSTER IP.
Step 2
Step 3
Configure IP Address, Subnet Mask and Default Gateway.
The first IP is for cluster internal control (For interactive communications between the main
device and sub device.), the virtual IP address is for cluster external control (For external
network connection).
Click OK.
Step 4
5.4.2 Main Device
Background Information
From SETTING > Cluster Service > Main Device, you can go to the Main Device interface.
On this interface, you can add several main devices manually. After you enable the cluster function,
you can view device IP, work status. Click operation, you can view the connection log of the main
device.
Procedure
Step 1
Click Manual Add.
417
User's Manual