Table of Contents
Advertisement
Parameter
Enable
Protocol Type
Host IP
Port
Auto Report Plan
Step 3
Click Apply to complete the settings.
4.11.15 Register
Background Information
You can register the Device into the specified proxy server which acts as the transit to make it easier
for the client software to access the Device.
Procedure
Select Main Menu > NETWORK > Register.
Step 1
The Register interface is displayed. See Figure 4-234.
Step 2
Configure the settings for the register parameters. See Table 4-78.
Table 4-77
Description
Enable the alarm center function.
In the Protocol Type list, select protocol type. The default is Alarm
Center.
The IP address and communication port of the PC installed with alarm
client.
In the Auto Report Plan list, select time cycle and specific time for
uploading alarm.
Figure 4-234
350
User's Manual
Advertisement
Table of Contents
