Block/Allow List; Adding Block/Allowlist - Dahua L Series User Manual

Table of Contents

● Password is required and must be the same with password for export; otherwise the

imported database cannot be saved.

● The address switches to /NVR/Facelib/ automatically if this directory is not changed.

Click OK to start importing face database, and you can view the progress on the importing

4.7.3.3 Block/Allow List

To manage vehicle management, you can add the corresponding plate number on the blocklist or

allowlist. System can compare the detected plate information with the plate on the

blocklist/allowlist and then trigger the corresponding alarm linkage.

After enable block/allowlist, on the preview interface, the plate in the blocklist is displayed as red on

the plate list, the plate in the allowlist is displayed as green on the plate list. For the plate not in the

block/allowlist, the plate is displayed as white.

Select Main Menu > AI > Database > B/W List.

The B/W List interface is displayed. See Figure 4-175.

Set plate information such as plate number, car owner name, and then select Blocklist or

Figure 4-175

User's Manual