Table of Contents
Advertisement
4.14.2.2 802.1x
The device needs to pass 802.1x certification to enter the LAN.
Procedure
Step 1
Select Main Menu > SECURITY > System Service > 802.1x.
The 802.1x interface is displayed. See Figure 4-264
Step 2
Select the Ethernet card you want to certify.
Step 3
Select Enable and configure parameters. See Table 4-86.
Parameter
Authentication
CA Certificate
Username
Password
Step 4
Click Apply to complete the settings.
Figure 4-264
Table 4-86 802.1x parameters
Description
● PEAP: protected EAP protocol.
● TLS: Transport Layer Security. Provide privacy and data integrity
between two communications application programs.
Enable it and click Browse to import CA certificate from flash drive. For
details about importing and creating a certificate, see "4.14.4 CA
Certificate".
The username shall be authorized at server.
Password of the corresponding username.
377
User's Manual
Advertisement
Table of Contents
