Channel Info - Dahua L Series User Manual

Icon

4.3.2.1 Channel Info

After the remote device registered to the corresponding channel, you can view its status such as
alarm status, record status, connection status, record mode, etc.
● Alarm status: It includes motion detection alarm, video loss alarm, tampering alarm.
● Record status: System is recording or not.
● Bit Rate: System displays bit rate information.
● Status: current channel connection status.
Click , system goes to the channel information setup interface. You can view information of the
corresponding channel. See Figure 4-59.
Function
Open the Voice Broadcast interface. For detail, see"4.17.3
Broadcast".
Open the Alarm Status interface to view the device alarm status.
For details, see "4.8.2 Alarm Status".
Open the Channel Info interface to display the information of
each channel. For details, see "4.3.2.1 Channel Info".
Open the Add Camera interface. For details, see "4.1.4.4 Adding
Camera".
Open the NETWORK interface. For details, see "4.10.3 Network".
Open the Disk Manager interface. For details, see "4.12.3 Disk
Manager".
Open the USB Management interface. For details about USB
operations, see "4.3.2.2 USB Management".
163
User's Manual