Parameter
Picture Storage
Buzzer
Alarm Tone
Click Apply to save the settings.
Step 3
● Click Default to restore the default setting.
● Click Copy to, in the Copy to dialog box, select the additional channel(s) that you want
to copy the motion detection settings to, and then click Apply.
● Click Test to test the settings.
4.8.5.1.1 Setting the Motion Detection Region
Procedure
Step 1
Next to Region, click Setting.
The region setting screen is displayed.
Step 2
Point to the middle top of the interface.
The setting interface is displayed. See Figure 4-182.
Step 3
Configure the regions settings. You can configure totally four regions.
● Select one region, for example, click
● Drag on the screen to select the region that you want to detect.
● The selected area shows the color that represents the region.
● Configure the parameters. See Table 4-58.
Description
Select the Snapshot check box to take a snapshot of the selected channel.
To use this function, select Main Menu > CAMERA > Encode > Snapshot,
select Event in Type list.
Select the check box to activate the buzzer when an alarm occurs.
Check the box and then select the corresponding audio file from the drop-
down list. System plays the audio file when the alarm occurs.
Refer to "4.17.1 File Management" to add audio file first.
Figure 4-182
291
.
User's Manual