Table of Contents
Advertisement
Parameter
Type
Protocol
Address
Baud rate
Data Bit
Stop Bit
Parity
Click Apply.
Step 3
4.4.2 PTZ Control
PTZ control panel performs the operations such as directing camera in eight directions, adjusting
zoom, focus and iris settings, and quick positioning.
Basic PTZ Control Panel
Right-click on the live view screen and then select PTZ. The PTZ control panel is displayed.
● The gray button means system does not support current function.
● For some series products, the PTZ function is valid in one-window mode.
Parameter
Speed
Zoom
Description
● Local: Connect through RS-485 port.
● Remote: Connect through network by adding IP address of PTZ camera
to the Device.
In the Protocol list, select the protocol for the PTZ camera such as PELCOD.
In the Address box, enter the address for PTZ camera. The default is 1.
The entered address must be the same with the address configured on the
PTZ camera; otherwise the system cannot control PTZ camera.
In the Baud rate list, select the baud rate for the PTZ camera. The default is
9600.
The default value is 8.
The default value is 1.
The default is value NONE.
Figure 4-90
Table 4-27
Description
Controls the movement speed. The bigger the value is, the faster the
movement will be.
: Zoom out.
: Zoom in.
192
User's Manual
Advertisement
Table of Contents
