Picture Search - Dahua L Series User Manual

Function
View
1/4/8/9/16/25/36
Sequence
Add Camera
Wireless Paring
Split Track
Manual Control
Live Mode
Crowd Distribution
Auto Focus
Image
Sub Screen

4.3.3.8 Picture Search

Background Information
Select the image of target person on the live view interface and then search by image for all the
related videos with the target person.
Procedure
Step 1 Click
Step 2 Draw a searching range by the way that is instructed by onscreen prompt, and then click
OK.
● If there are less than 30 faces in the selected range, the searching starts immediately.
● If there are more than 30 faces, human bodies, and vehicles in the selected range, a
prompt is displayed indicating that there are too many targets and the searching range
should be reduced. The image stays frozen and you can start modifying range.
Description
Configure the live view screen as a single-channel layout or multi-channel
layout.
Set customized screen split mode and channels. For details, see "4.3.5
Sequence".
Open the Add Camera interface. For details, see "4.1.4.4 Adding Camera".
Right-click Wireless Paring to quickly add IPCs. For details, see "4.3.4
Wireless Paring".
Split the screen of a certain channel. For details, see "4.3.9 Split Tracking".
● Select Record Mode, you can configure the recording mode as Auto
or Manual, or stop the recording. You can also enable or disable
snapshot function
● Select Alarm Mode, you can configure alarm output settings.
There are two modes: General/AI mode.
Select enable/disable to start/stop crowd distribution function.
Click to realize auto focus function. Make sure the connected camera
supports auto focus function.
Click to modify the camera properties. For details, see "4.2.4 Image".
Click Sub Screen, you can go to control the sub screen.
, and the live image is frozen.
173
User's Manual