Table of Contents
Advertisement
Step 3
Enter human face database name and then click OK.
System successfully saves the face library.
4.7.3.1.1 Adding Face Pictures
You can add face pictures to the existing libraries one by one or by batch, or add from the detected
faces.
To add face pictures one by one or by batch, you need to get the pictures from the USB storage
device. The picture size should be smaller than 256K with resolution between 200×200–6000×5000.
● To add face pictures one by one or by batch, you need to get the pictures from the USB storage
device. The picture size should be smaller than 256K with resolution between 200×200–
6000×5000.
● The picture resolution for NVR2-I series should be less than or equal to 1920×1080.
4.7.3.1.2 Adding One Face Picture
Background Information
You can add one face picture to the database. It is for the scenario that the registered human face
picture amount is small.
Procedure
Step 1
Select Main Menu > AI > Database > Face Database Config
The Face Database Config interface is displayed.
Step 2
Click
The Details interface is displayed. See Figure 4-167.
Figure 4-166
of the library that you want to configure.
275
User's Manual
Advertisement
Table of Contents
