● On the broadcast interface, click
group.
● After complete broadcast setup, on the preview interface and then click
navigation bar, device pops up broadcast dialogue box. Select a group name and then
click
4.18 USB Device Auto Pop-up
After you inserted the USB device, system can auto detect it and pop up the following dialogue box.
It allows you to conveniently backup file, log, configuration or update system. See Figure 4-296.
Refer to "4.17.1 File Management", "4.10.1 Log", IMP/EXP, and "4.10.4.4 System Update" for detailed
information.
to change group setup, click
to begin broadcast. See Figure 4-295.
Figure 4-295 Add group (2)
408
User's Manual
to delete
on the