Queuing - Dahua L Series User Manual

Parameter
Delay
Tour
Log
Voice Prompts
Buzzer
Step 4 Click Apply.

4.7.2.7.2 Queuing

Background Information
After connecting to the AI fisheye camera that supports the queuing function, system can realize the
corresponding linkage actions once the people amount in the queue or the waiting time has trigger
an alarm. Select a region first to set the corresponding actions. For the same line, the queue people
number alarm and queue time alarm has the same linkage actions.
Procedure
Select Main Menu > AI > Parameters > People Counting > Queuing.
Step 1
The Queuing interface is displayed. See Figure 4-158.
Step 2
Description
At the end of the alarm, the recording extends for a period of time. The
time range is from 10 seconds to 300 seconds.
Select the check box and select the channel for tour. When an alarm
occurs, the local interface of the NVR device displays the selected channel
screen.
● You need to set the time interval and mode for tour first, see "4.16.2
Tour".
● After the tour is over, the preview interface is restored to the screen
split mode before the tour.
Select the check box, the NVR device records the alarm information in the
log when an alarm occurs.
Check the box and then select the corresponding audio file from the
dropdown list. System plays the audio file when the alarm occurs.
Refer to "4.17.1 File Management" to add audio file first.
Select the check box to activate the buzzer when an alarm occurs.
261
User's Manual