Dahua NVR5224-24P-4KS2 Quick Start Manual
  1. Manuals
  2. Brands
  3. Dahua Manuals
  4. Network Hardware
  5. NVR5224-24P-4KS2 Series
  6. Quick start manual

Dahua NVR5224-24P-4KS2 Quick Start Manual

Hide thumbs Also See for NVR5224-24P-4KS2:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Network Video Recorder
Quick Start Guide
Version 1.0.0

Advertisement

Table of Contents
loading

Related Manuals for Dahua NVR5224-24P-4KS2

Summary of Contents for Dahua NVR5224-24P-4KS2

  • Page 1 Network Video Recorder Quick Start Guide Version 1.0.0...

  • Page 2: Table Of Contents

    Table of Contents Preparation Work ......................1 HDD Installation ........................ 2 2.1 SMART BOX ......................2 2.2 SMART 1U ......................2 2.3 MINI 1U, COMPACT 1U, 1U................3 Rear Panel......................... 4 GUI Operation ........................7 4.1 Boot up ........................7 4.2 Device Initialization ....................
  • Page 3 Welcome Thank you for purchasing our network video recorder! This quick start guide is designed to be a reference tool for your system. Keep it well for future reference. Contact your local retailer ASAP if something is missing or damaged in the bag. Safety Instruction Icon Note...
  • Page 4 Important Safeguards and Warnings 1．Electrical safety  All installation and operation here should conform to your local electrical safety codes.  An apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection. ...
  • Page 5 RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

  • Page 6: Preparation Work

    1 Preparation Work DANGER All the installation and operations here should conform to your local electric safety rules. Name Contents Whole Appearance There is any visible damage or not. package Package There is any accidental clash during transportation or not. Front The model on the front Check the model with the purchase...

  • Page 7: Hdd Installation

    2 HDD Installation DANGER Shut down the device and then unplug the power cable before you open the case to replace the HDD! All figures listed below for reference only! 2.1 SMART BOX Please make sure the metal surface of the HDD is facing up when you are installing! This series product has only one 2.5-inch SATA HDD.

  • Page 8: Mini 1U, Compact 1U, 1U

    ○ ○ ○ . Loosen the screws of the bottom of Place the HDD in Turn the device upside the chassis. accordance with the four holes down and then secure the in the bottom. screws firmly. ○ ○ Connect the HDD cable and power Put the cover back and then cable to the HDD and the mainboard fix the screws of the rear panel.

  • Page 9: Rear Panel

    3 Rear Panel Follow figures listed here for reference only. Please refer to the actual product for detailed information. PoE 接口直连 IPC=PoE port to Connect to Network Camera 以太网口=Ethernet Port 电源输入接口=Power Input Port USB 接口=USB Port HDMI 高清接口=HDMI Port VGA 接口=VGA Port For SMART BOX series product, the front panel is shown as in Figure 3-1.
  • Page 10 电源输入接口=Power Input Port HDMI 高清接口=HDMI Port VGA 接口=VGA Port 接地=GND Figure 3-3 For 1U series product, the front panel is shown as in Figure 4-4 电源输入接口=Power Input Port 电源开关=Power on-off Button VGA 接口=VGA Port 以太网口=Ethernet Port PoE 接口直连 IPC=PoE port to Connect to Network Camera 音频输出接口=Audio Output Port RS232 接口=RS232 Port 报警输入输出接口=Alarm Input/Output Port...
  • Page 11  The 4PoE series product supports 48V 50W total power. The 8PoE series products supports 48V 120W total power.

  • Page 12: Gui Operation

    4 GUI Operation Note Slight difference may be found on the user interface. All figures listed below for reference only. 4.1 Boot up DANGER Before the boot up, please make sure:  For device security, please connect the NVR to the power adapter first and then connect the device to the power socket.
  • Page 13 Figure 4-1 Step 2 Set login password of admin.  User name: The default user name is admin.  Password/confirm password: The password ranges from 8 to 32 digitals. It can contain letters, numbers and special characters (excluding “'”,“"”,“;”,“:”,“&”) . The password shall contain at least two categories.
  • Page 14 Figure 4-2 Step 4 Set unlock pattern. After set unlock pattern, device goes to password protection interrface. See Figure 4-3. Note  Device adopts unlock pattern to login by default if you have set pattern here. If there is no unlock pattern, please input the password to login.
  • Page 15 Figure 4-3 Step 5 Set security questions. Note  After setting the security questions here, you can use the email you input here or answer the security questions to reset admin password. Refer to user’s manual for detailed information.  Cancel the email or security questions box and then click Next button to skip this step. ...

  • Page 16: Change Ip Address

    4.3 Change IP Address Note Different series products have different Ethernet adapter amount and type. Please refer to the actual product. From Main menu->Setting->Network->TCP/IP, enter TCP/IP interface. See Figure 4-4. It is to change default IP address (192.168.1.108). Figure 4-4 4.4 Camera Registration From Main menu->Setting->Camera->Registration, enter Registration interface.

  • Page 17: Schedule

    Figure 4-5 4.5 Schedule From Main menu->Setting->Storage->Schedule, enter schedule interface. See Figure 4-6. After device first booted up, all channels are record continuously by default. Device supports customized record period and record type.

  • Page 18: Playback

    Figure 4-6 4.6 Playback From Main menu->Search, or on the preview interface right click mouse and then select search item, enter the following interface. See Figure 4-7. It is to search and playback the video record file or image. Please refer to the user’s manual for detailed information.

  • Page 19: Shut Down

    Figure 4-7 4.7 Shut down From Main menu->shut down, enter the shutdown interface. Click Shut down.

  • Page 20: Web Operation

    5 Web Operation If it is your first time to login the device, please initialize your device first. Refer to the user’s manual for detailed information. 5.1 Login Step 1 Open the browser and input NVR address in the address column. Click Enter button. Enter login interface.
  • Page 21 Figure 5-2...

  • Page 22: P2P

    6 P2P Step 1 Use cell phone to scan the client QR code and download the APP. See Figure 6-1. Note  There are two ways to get QR code.  Refer to the device package box to get the cell phone client QR code. ...
  • Page 23 Tap P2P to add the device. See Figure 6-3. Figure 6-3 Scan the device label or the device SN on the device local menu to add the device. See Figure 6-4. Figure 6-4 After scan, you can view the product SN. Click the Start live preview button, now you can see live view on the cell phone.
  • Page 24 Figure 6-5 For detailed operation information, please refer to the User’s Manual. Note  Slight difference may be found in user interface.  All the designs and software here are subject to change without prior written notice.  All trademarks and registered trademarks are the properties of their respective owners. ...

Table of Contents