Table of Contents
Advertisement
4.11.8 PPPoE
Background Information
PPPoE is another way for the Device to access the network. You can establish network connection by
configuring PPPoE settings to give the Device a dynamic IP address in the WAN. To use this function,
firstly you need to obtain the user name and password from the Internet Service Provider.
Procedure
Select Main Menu > NETWORK > PPPoE.
Step 1
The PPPoE interface is displayed. See Figure 4-226.
Step 2
Enable the PPPoE function.
Step 3
In the User Name box and Password box, enter the user name and password accordingly
provided by the Internet Service Provider.
Step 4
Click Apply to complete the settings.
The system pops up a message to indicate the successfully saved. The IP address appears
on the PPPoE interface. You can use this IP address to access the Device.
Figure 4-225
Figure 4-226
340
User's Manual
Advertisement
Table of Contents
