Table of Contents
Advertisement
Procedure
Step 1
Log in to the web as the admin user.
Select SETTING > Cluster Service > CLUSTER IP.
Step 2
Select Enable.
Step 3
Step 4
Configure IP Address , Subnet Mask and Default Gateway.
Click OK.
Step 5
6.4.2 Main Device
Background Information
You can add several main devices manually. After you enable the cluster function, you can vie IP
address, working status and connection log of the main device.
Procedure
Step 1
Select SETTING > Cluster Service > Main Device.
Click Manual Add.
Step 2
Step 3
Configure parameters.
Parameter
Device Name
IP Address
Figure 6-2 Manual add
Table 6-2 Parameters of adding main device
Description
Customize the device name.
Enter the IP address of the NVR.
436
User's Manual
Advertisement
Table of Contents
