Table of Contents
Advertisement
◇
◇
◇
● Click Create Manually.
1. Select RAID type and disks as system instructed.
2. Click Create Manually, and then the format disk notice is displayed.
3. Click OK.
Step 3
After creating RAID, the disks need to sync with each other to finish the process. For RAID5
and RAID6, you can select different working mode.
● Self-Adaptive: Automatically adjust the RAID sync speed according to the business
status.
◇
◇
● Sync First: Resource priority is assigned to RAID sync.
● Business First: Resource priority is assigned to business operations.
● Balance: Resource is evenly distributed to RAID sync and business operations.
4.12.8.2 RAID Info
You can view the existing RAID information, including type, disk space, hot spare, and status.
Select Main Menu > STORAGE > RAID > RAID Info.
The RAID Info interface is displayed. See Figure 4-248.
If there is no existing RAID and no hot spare disk, the system will create RAID5 and a
hot spare disk automatically.
If there is no existing RAID, but existing hot spare disk, the system will only create
RAID5 and use the existing hot spare disk automatically.
If there is existing RAID and existing hot spare disk, the system will delete the
original RAID and create RAID5 with all the disks and use the existing hot spare disk
automatically.
When there is no business running, sync is performed at a high speed.
When there is business running, sync is performed at a low speed.
364
User's Manual
Advertisement
Table of Contents
