Parameter
Username,
Password
Step 3
Click Apply.
4.13 System
4.13.1 General
You can set device general information. It includes device information, system date. Refer to "4.1.4.1
General" for detailed information.
4.13.2 Serial Port
Background Information
After setting RS-232 parameters, the NVR can use the COM port to connect to other device to debug
and operate.
Procedure
Step 1
Select MAIN MENU > SYSTEM > Serial Port.
Step 2
The Serial Port interface is displayed. See Figure 4-259.
Step 3
Configure parameters. See Table 4-84.
Description
Enter the username and password of iSCSI server.
If anonymous login is supported by iSCSI server, you can enable
Anonymous to log in as an anonymous user.
Figure 4-259
372
User's Manual