Table of Contents
Advertisement
◇
● Define the period by editing. Take Sunday as an example.
1. Click
2. Enter the time frame for the period, and then select the check box to enable the
3. Click OK to save the settings.
Step 3
On the Motion Detection interface, click Apply to complete the settings.
4.8.5.2 Video Tampering
Background Information
When the camera lens is covered, or the video is displayed in a single color because of sunlight
status, the monitoring cannot be continued normally. To avoid such situations, you can configure
the tampering alarm settings.
Procedure
Select Main Menu > ALARM > Video Detection > Video Tampering.
Step 1
The Video Tampering interface is displayed. See Figure 4-185.
active periods, all the days with
Define for all days of a week: Click All, all
day, click the half-hour blocks to select the active periods, all the days will take the
same settings.
.
The Period interface is displayed. See Figure 4-184.
Figure 4-184
settings.
◇
There are six periods for you to set for each day.
◇
Under Copy to, select All to apply the settings to all the days of a week, or select
specific day(s) that you want to apply the settings to.
will take the same settings.
switches to
293
User's Manual
. On the timeline of any
Advertisement
Table of Contents
