Table of Contents

Advertisement

Parameter
Default Ethernet

Port

IP Version
MAC Address
DHCP
IP Address
Subnet Mask
Default Gateway
DNS DHCP
Preferred DNS
Alternate DNS
MTU
Test
4.11.2 Port
Background Information
You can configure the maximum connection accessing the Device from Client such as WEB, Platform,
and Mobile Phone and configure each port settings.
Procedure
Step 1
Select Main Menu > NETWORK > Port.
Description
In the Ethernet Card list, select an Ethernet port as a default port.
This setting is available only when the Multi-address is selected in the
Net Mode list.
In the IP Version list, you can select IPv4 or IPv6. Both versions are
supported for access.
Displays the MAC address of the Device.
Enable the DHCP function. The IP address, subnet mask and default
gateway are not available for configuration once DHCP is enabled.
● If DHCP is effective, the obtained information will display in the IP
Address box, Subnet Mask box and Default Gateway box. If not, all
values show 0.0.0.0.
● If you want manually configure the IP information, disable the DHCP
function first.
● If PPPoE connection is successful, the IP address, subnet mask,
default gateway, and DHCP are not available for configuration.
Enter the IP address and configure the corresponding subnet mask and
default gateway.
IP address and default gateway must be in the same network segment.
Enable the DHCP function to get the DNS address from router.
In the Preferred DNS box, enter the IP address of DNS.
In the Alternate DNS box, enter the IP address of alternate DNS.
In the MTU box, enter a value for network card. The value ranges from
1280 byte through 1500 byte. The default is 1500.
The suggested MTU values are as below.
● 1500: The biggest value of Ethernet information package. This value
is typically selected if there is no PPPoE or VPN connection, and it is
also the default value of some routers, network adapters and
switches.
● 1492: Optimized value for PPPoE.
● 1468: Optimized value for DHCP.
● 1450: Optimized value for VPN.
Click Test to test if the entered IP address and gateway are interworking.
328
User's Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nvr41-p-4ks2 seriesNvr41-8p-4ks2 seriesNvr41-4ks2 seriesNvr21-4ks2 seriesNvr21-p4ks2 seriesNvr21-8p-4ks2 series ... Show all

Table of Contents