Table of Contents
Advertisement
In the Type list, select Key Area Detect or Global Check; and in the Disk list, select the
Step 2
HDD that you want to detect.
Step 3
Click Start Check.
The system starts detecting the HDD and displays the detection information.
When system is detecting HDD, click Stop Check to stop current detection. Click Start
Check to detect again.
4.12.7.2 Detect Report
Background Information
After the detect operation, you can go to the detect report to view corresponding information.
Replace the malfunction HDD in case there is data loss.
Procedure
Step 1
Select Main Menu > STORAGE > Disk Check > Check Report.
The Check Report interface is displayed. See Figure 4-243.
Figure 4-242
359
User's Manual
Advertisement
Table of Contents
