Table of Contents
Advertisement
Parameter
Encryption Type
Step 3
Compile the two MIB files by MIB Builder.
Step 4
Run MG-SOFT MIB Browser to load in the module from compilation.
Step 5
On the MG-SOFT MIB Browser, enter the Device IP that you want to manage, and then
select the version number to query.
Step 6
On the MG-SOFT MIB Browser, unfold the tree-structured directory to obtain the
configurations of the Device, such as the channels quantity and software version.
4.11.13 Multicast
Background Information
When you access the Device from the network to view the video, if the access is exceeded, the video
will not display. You can use the multicast function to group the IP to solve the problem.
Procedure
Select Main Menu > NETWORK > Multicast.
Step 1
The MULTICAST interface is displayed. See Figure 4-232.
Step 2
Configure the settings for the multicast parameters. See Table 4-76.
Parameter
Enable
Description
In the Encryption Type list, select an encryption type. The default setting
is CBC-DES.
Figure 4-232
Table 4-76
Description
Enable the multicast function.
348
User's Manual
Advertisement
Table of Contents
