Step 2
Configure parameters.
Parameter
Device Name
IP Address
Port
Username/Password
Click OK.
Step 3
Step 4
(Optional) Click
5.4.3 Sub Device
Background Information
When you add the first sub device, the default IP is the device IP address that logins on the web.
From SETTING > Cluster Service > Sub Device, you can go to the Sub Device interface.
See "5.4.2 Main Device" to add sub device.
After you added main device and sub device, you need to enable cluster function. Otherwise, cluster
function is null. See "5.4.5 Cluster Control" for more information.
5.4.4 Transfer Record
When the main device is in malfunction and the sub device starts to record. The NVR automatically
Figure 5-3
Table 5-2
Description
This parameter is user defined.
Enter the IP address of the NVR.
Set the TCP port number of the server. The default value is 37777.
You can view the current TCP port number in SETTING > Network >
Port
Enter the username and password of the NVR.
to view event occurrence time, name, operation and reason.
418
User's Manual