Table of Contents
Advertisement
4.1.4.3 P2P
Background Information
Scan the QR code on the actual interface to download the cell phone app. Register an account and
then you can use the smart phone to add the device.
Before using the P2P function, make sure that the NVR has connected to the WAN.
4.1.4.3.1 Local Operation
Step 1
Click Next button.
The P2P interface is displayed. See Figure 4-20.
Select Main Menu > Network > P2P, you can go to P2P interface too.
Step 2
Check the box to enable P2P function.
After the P2P function is enabled and connected to the Internet, the system will collect
your information for remote access, and the information includes but not limited to email
address, MAC address, and device serial number.
Step 3
Click Next button to complete setup.
The status is online if the P2P registration is successful.
Figure 4-20 P2P
120
User's Manual
Advertisement
Table of Contents
