Table of Contents
Advertisement
Select SETTING > Cluster Service > CLUSTER IP.
Step 2
Select Enable.
Step 3
Step 4
Configure IP Address , Subnet Mask and Default Gateway.
Click OK.
Step 5
6.4.2 Main Device
You can add several main devices manually. After you enable the cluster function, you can vie IP
address, working status and connection log of the main device.
Procedure
Step 1
Select SETTING > Cluster Service > Main Device.
Click Manual Add.
Step 2
Step 3
Configure parameters.
Parameter
Device Name
IP Address
Port
Username/Password
Figure 6-3 Manual add
Table 6-2 Parameters of adding main device
Description
Customize the device name.
Enter the IP address of the NVR.
Set the TCP port number of the server. The default value is 37777.
You can view the current TCP port number in SETTING > Network >
Port.
Enter the username and password of the NVR.
452
User's Manual
Advertisement
Table of Contents
