4.1.4.3.2 Client Operation
Procedure
Step 1
Use your smart phone to scan the QR code under Cell Phone Client to download the
application.
Step 2
On your smart phone, open the application, and then tap
Step 3
The menu is displayed. You can start adding the device.
1) Tap Device Manager.
The Device Manager interface is displayed. See Figure 4-21.
2) Tap
The interface requiring device initialization is displayed. A pop-up message reminding
you to make sure the Device is initialized is displayed.
3) Tap OK.
● If the Device has not been initialized, Tap Device Initialization to perform
● If the Device has been initialized, you can start adding it directly.
4) Tap Add Device.
You can add wireless device or wired device. The manual takes adding wired device as
an example.
5) Tap P2P.
The P2P interface is displayed. See Figure 4-22.
Figure 4-21 Device manager
on the top right corner.
initializing by following the onscreen instructions.
121
User's Manual
.