● Select an alarm event log and then click Backup to back up it to peripheral USB device.
● Select an alarm event log, click
click a log or click Details to view the detailed information of the event.
4.8.2 Alarm Status
You can view NVR alarm event, and remote channel alarm event.
Select Main Menu > ALARM > Alarm Status, the Alarm Status interface is displayed. See Figure 4-
178.
4.8.3 Alarm Input
Procedure
Step 1
Select Main menu > ALARM > Alarm-in Port.
The Alarm-in Port interface is displayed. See Figure 4-179.
Step 2
There are four alarm types.
● Local alarm: After connect the alarm device to the NVR alarm input port, system can
trigger the corresponding alarm operations when there is alarm signal from the alarm
input port to the NVR.
● Network alarm: NVR trigger corresponding alarm operations when it receives the alarm
signal via the network transmission.
to play the recorded video of alarm event. Double-
Figure 4-178
284
User's Manual