Step 2
In the Destination IP box, enter the IP address.
Click Test.
Step 3
After testing is completed, the test result is displayed. You can check the evaluation for
average delay, packet loss, and network status.
4.10.4 Maintenance and Management
4.10.4.1 Device Maintenance
Background Information
When the Device has been running for a long time, you can configure the auto reboot when the
Device is not working. You can also configure the case fan mode to reduce noise and extend the
service life.
Procedure
Select Main Menu > MAINTAIN > Manager > Maintenance.
Step 1
The Maintenance interface is displayed. See Figure 4-207.
Figure 4-206
319
User's Manual