Table of Contents
Advertisement
2) Set parameters. See Table 4-39.
Parameter
Preset
Name
Duration
Filter target
3) Draw a rule. Left click mouse to draw a zone, until you draw a rectangle, you can right
click mouse.
4) Click OK to complete the rule setting.
Step 3
Click
Click Apply to complete the setup.
Step 4
4.7.2.4.4 Fast Moving
Background Information
You can detect the fast moving object in the specified zone.
Figure 4-144
Description
Select a preset you want to use IVS.
Input customized rule name
System can generate an alarm once the object is in the zone for the
specified period.
Click
to filter the target. Check the blue wireframe and adjust the size
of the area with the mouse.
Each rule can set 2 target filters (maximum size and minimum size), that
is, when the passing target is smaller than the minimum target or larger
than the maximum target, no alarm will be generated. The maximum
size should not be smaller than the minimum size.
, you can refer to "4.7.2.4.1 Tripwire" to set other parameters.
Table 4-39
246
User's Manual
Advertisement
Table of Contents
